What is plastic pelletizing machine?
Plastic pelletizing machine is the process of converting scrap plastic back into a usable clean raw material. Plastic manufacturing companies can then re-use these pelletized plastics in a wide variety of applications, creating a closed-loop recycling process. There are many benefits to establishing a plastic pelletizing recycling system for your business.

Plastic pelletizing machine is one of the best ways to reuse and repurpose plastic scraps that are produced in high quality from manufacturing plants. By working with a plastic pelletizing company, plastics manufacturers can not only reduce their raw material costs but also improve their green initiatives.

What are the precautions before and after the use of plastic pelletizing machines?

1. Adjust the proper distance between the granulator and the screen of the plastic pelletizing machine. Generally, the closer the better, the better the normal operation will not touch the granule.

2. Before working, check whether the plastic granulator screen ring is fixed. Is the screw on the granulating knife fastened, loose or not, and is the mesh of the screen clean?

3. Let the plastic pelletizing machine run normally for a few minutes, is it working properly? Start slowly feeding, Note: There should be no hard materials in the added materials, especially hard materials. Adjust the appropriate speed according to the viscosity of the material. If the viscosity is high, turn the speed down, try not to shake the sieve in the process.

4. If the mesh does not discharge during work, the mesh of the screen may have been blocked. Remove the screen and clean it. If it is not working after a certain period of time, wait for the next work. The screen is cleaned before it can work, so that the powder is not blocked in the mesh, so it is easy to squeeze the screen.

5. Air-cooling and water-cooling are turned on according to the material characteristics. If it is sensitive to heat, the component will be slightly larger, and the heat-insensitive opening will not open.

6. The plastic granulator should be completely maintained for 3 months, and the oil of the reducer should be replaced and replaced with new mechanical oil.

7. After each work, thoroughly clean the plastic granulation mechanism granules and granules, and dry them with a dry cloth.

8. When the plastic granulator is working or cleaning, the material cannot be dropped into the inverter panel, which makes it easy to damage the inverter panel. Slow speed regulation when speed regulation.