Plastic Squeezing Pelletizing Line Application:
Plastic Squeezing Pelletizing line is used for drying those washed film, woven bags. etc. and make it like granules. After that, the granules can be put into the extruder directly.
Plastic Squeezing  Pelletizing line is a full automatic Squeezing & Pelletizing Machine to the film and woven bags, with the screw squeezing and electrical heating, make the materials have high degree of drying and full plasticizing, low power consumption, high output. The final moisture is only 3-5%. The capacity would be customized according to the requests of clients.

Plastic Squeezing Pelletizing Line Description:
Waste plastic products and films are materials that are not easily degradable and discard the environment that is likely to cause pollution. Its recycling is an important part of environmental protection. The squeezing granulator, as a machine integrating dewatering and granulation, plays a very important role in the process of processing plastic products. Solve the problem of difficult dehydration of traditional soft film or filamentary plastics. In traditional centrifugal dehydrators, the final product dryness is only 15-20%. If multi-stage air delivery and hot air drying are used, because the drying time is too short, there will still be at least 10% moisture and consume a lot of electricity. As a result, the operating cost of the customer’s recycled materials is too high, and the finished product is difficult to be competitive in the market! The squeezing granulator was born under this background. It can easily control the moisture of the cleaned material below 3%. At the same time, it can also control plastic film, tons of bags, diapers, etc. that are traditionally difficult to dehydrate. The filamentous plastic is semi-plasticized into granules, which improves its bulk density, facilitates the granulation of the subsequent equipment, and can also replace the traditional agglomerator! In this way, we have achieved the effect of killing four birds with one stone: saving electricity, saving labor, improving material dryness, and increasing output!

Plastic Squeezing Pelletizing Line Working Principle:

Equipment composition structure: feed screw, feed bin, reducer, extrusion screw barrel, die head, air-cooled die face pelletizing system, cooling fan, storage bin, drainage system, control cabinet! The control system of the equipment is manufactured by the European CE standard design machine! The squeezing granulation system.
It has an interlock protection system. When the main motor is over-current, the control system will send out an audible and visual alarm, and at the same time automatically stop the screw feeder from feeding to protect the main motor from running smoothly! The pelletizing system is equipped with a safety limit switch. When the pelletizing cavity is opened, the cutter is replaced, and the maintenance is performed, the control system is interlocked
All operation buttons are prohibited from starting to protect the safety of maintenance personnel!
The working process of the equipment is: the material enters the extrusion screw and screw barrel from the inlet, and the extrusion screw squeezes the material to the outlet. In this process, the plasticized material is squeezed out, the water flows out from the leaking tank, and the pelletizing knife cuts the extruded semi-plasticized dry plastic into pellets. The fan conveys the granular material to Silo while cooling the cut plastic particles.
The general processing materials are PE, PP, BOPP, PVC, PS material film, and also can be nylon fishing net and diapers. At the same time, it can also be used as a means of processing paper pulp, and the squeezed and pelletized paper pulp can be used as a power generation combustion material in a power plant.

Plastic Squeezing Pelletizing Line Related equipment:

Video